Remember that exposed ends of wood may need additional staining, due to greater absorption. If you are staining a fence or other vertical surface, start at the top to ensure that you’ll cover any drips or runs as you work your way down. As you’re applying stain to pressure-treated wood, keep in mind that back brushstrokes constitute additional coats and may cause color variation. If all looks good, continue staining the rest of your pressure-treated wood. STEP 7: Apply at least one coat of stain.
#Do you need pressure treated wood if you paint it Patch
This test patch will help ensure that you’ll be happy with the completed project before you sink hours into it, and will also confirm that the stain will go on properly and without any issues, such as wetness. Select a small area and brush on the stain, allowing it to dry before proceeding to work on the entire structure. While it may be tempting to rush to finish the project completely, always test the stain in an inconspicuous spot. Photo: STEP 6: Test the stain to make sure you like how it looks. Either way, continue to stir the stain frequently as you work to ensure the best application. You can have the hardware store do so at the time of purchase, or you can just shake it well at home. STEP 5: Ready your chosen wood stain for application. Stain applications need about 24 to 48 hours of drying time, so you’ll need to be certain that the skies will remain precipitation-free during that time. STEP 4: Choose the right time for your project.Ĭheck the weather forecast to make sure no rain is expected. If water seeps out around the nail while it’s being pressed into the wood, then more drying time is needed. Alternatively, simply press a nail into the wood to test for wetness.
The first is a bead test, which is performed by simply dripping small amounts of water on the wood if the water beads, then the wood still retains some moisture. When you’re ready to proceed, there are a few effective ways for testing the level of moisture in the wood. STEP 3: Test the moisture level of the wood. Drying times range anywhere from a few weeks to a few months, depending on such factors as weather and climate. It’s important to wait until your pressure-treated wood is completely dry before applying stain, as the chemicals used to treat the wood often leave additional moisture behind. ( View our guide to the best deck cleaners.) Stop by your local hardware store to pick up a specially developed wood cleaner for decks, fences, or other wood structures, and follow the product’s instructions for a thorough cleaning. If you’re dealing with older wood, however, you’ll need to take additional steps in order to remove stains and years’ worth of built-up grime. The easiest way to wash new wood is to knock loose any dirt or residue using a pressure washer. Photo: STEP 2: Prepare the surface you plan to paint.īefore you stain pressure-treated wood, you should clean it first.
0 kommentar(er)
